Big 5 Combo Injector

Technical Specifications:

Baby Injector Specifications:

• Diameter = 25mm.
• Length = 185mm (compressed with no needle)
• Weight = 150g (with needle and no fluid)
• Volume = 50ml

Large Injector Specifications:

• Diameter = 38mm.
• Length = 290mm (compressed with no needle)
• Weight = 300g (with needle and no fluid)
• Volume = 160ml

Needle Specifications:

• 6mm thick x 125mm long front injection needle
• 8mm thick x 150mm long front injection needle
• Please Note: (The 8mm side injection needle is an optional extra)

Inside the box:

• 2 x Syringes (Baby Injector 50ml and Big Injector 160ml)
• 2 x Stainless Steel needles (6mm & 8mm fits on both syringes)
• Spare O-Rings for both syringes
• Instruction manual and recipes
• 3mm wooden storage box

How to use:

•  Clean the injector thoroughly before use.
• Please make use of the cleaning instructions as indicated below.
• Make a marinade of your choice.
• Pick the correct needle for the correct job. The big needle is easier to use with chunky marinades!
• Screw the appropriate needle on the front of the injector.
• Ensure that the needle O-ring touches the injector for sealing purposes. Don’t over-tighten.
• Push the plunger completely in, place the needle in the marinade, and pull the injector to suck the marinade into the injector.
• Insert the needle into the meat as deep as you require and inject the marinade into the meat. Inject slowly to prevent the marinade from squirting back out.

Cleaning instructions:

• NOTE: The front cap cannot be removed.
• Unscrew the needle. • Unscrew the rear cap for cleaning and pull the plunger out.
• Put everything in warm, soapy water.
• After the components are cleaned up and dried, add a touch of olive oil to the O-ring before reinserting the inner slider into the cylinder.
• Screw the back cap back onto the cylinder. Don’t over-tighten. • Spare O-rings are supplied as future replacement parts.